Disc Brake Maintenance At Christy's Auto Service In Brooklyn Center

Today, we're talking about disc brakes. Your vehicle weighs several thousand pounds and it takes a lot of force to bring it and your passengers to a safe stop, so everything needs to be in good working order.

The wheel hub keeps your wheel attached to the vehicle. The brake disc – or rotor – is attached to the hub and spins with the wheel as you drive. Your brake pads clamp onto the rotor to slow the wheel. The brake caliper straddles the rotor and squeezes the rotor to slow it down. The calipers contain brake pads which rub on the rotor when you step on the brakes. The brake piston causes the calipers to squeeze and release as you use your brakes.

Your vehicle brake pads start to wear the first time you step on the brakes. Eventually the pads are worn out and need to be replaced. If you don't replace brake pads when they're worn out, the metal parts of the brake will grind against the rotor and carve grooves into the surface. If a scored rotor isn't too bad, a technician may be able to put the rotor on a lathe and smooth it out. If the grooves are too deep or if the rotor is warped or cracked, you need to replace it.

Servicing disc brakes at Christy's Auto Service requires special attention to the mechanical sliding and mounting portions of the system. Your Christy's Auto Service service supplier knows the special needs. Sometimes brake pistons can stick and must be replaced. Typically it's cheaper to replace the entire caliper than to rebuild the piston.

So there you have it – a brief Christy's Auto Service guide to how your disc brakes work. Brooklyn Center residents who replace their brake pads on time will not only keep their vehicle stopping safely but could save money on unnecessary brake repair down the road.

Give us a call.

Christy's Auto Service
763.560.9984
5300 Dupont Avenue N.
Brooklyn Center, MN 55430
http://christysautoservice.com